Centaurus Prime

Impossible Integrations? . . No Problem!

Home

Integrations

Products

About Us

Contact Us

 
RS232/485 Converters
CP485x4
CP485x4 - RS232/485 Interface Converter

The CP485x4 line driver is a quad RS-232 to RS-485 interface converter. It allows an RS-232 device to reliably transmit data over long distances (up to 4000 feet). The CP485x4 has many features not normally found in typical line drivers, and is intended for operation in harsh industrial environments.

CP485x4 User Manual

CPTI - 4232 Quad Staefa Smart-II TTL To RS-232 Interface Converter

The CPTI-4232 is a quad, TTL to RS-232 interface module. It has been created to allow up to four Staefa Smart II communication trunks to connect with four RS-232 ports on a Tridium Jace Network Manager using the Smart II driver. It can also be used to interface four SM2 trunks to four RS-232 ports on the Staefa Talon Network Manager.

CPTI-4232 User Manual

Gateways
Centaurus Prime BACnet PIC Statement

Trane VAV Gateway for Varitrane VAV Controllers

The Centaurus Prime Trane-485 Gateway allows any front-end system (Modbus Master or BACnet/IP) that communicates using either the industry-standard Modbus or BACnet protocols to communicate to Trane VAV field equipment. The Trane VAV field devices will appear to the front-end system as a series of Modbus SLAVE devices or BACnet Devices. Each Trane-485 Controller will map to one of these devices. Real time point data from the Trane VAV controllers is then mapped to equivalent registers, coils, and bits on the Modbus system, or as AI, BI, AO, and BO objects on the BACnet system. All operations are transparent to the user and the host computer.

Trane Gateway Cutsheet

Trane Gateway User Manual


Landis & Gyr (Landis & Staefa) Gateway for "P1 Protocol" Controllers

The Centaurus Prime “P1” Gateway allows any front-end system (Modbus Master or BACnet/IP) that communicates using the either industry-standard Modbus or BACnet protocols to communicate to Siemens (also known as Staefa, Landis & Staefa, Landis & Gyr, Powers, or even MCC Mark Controls, for real old-timers) P1-trunk field equipment. The P1-trunk field devices supported (MPU, DPU and TEC devices) will appear to the front-end system as a series of Modbus SLAVE devices or BACnet Devices. Real time point data from the Siemens P1-trunk controllers is then mapped to equivalent registers, coils, and bits on the Modbus system, or as AI, BI, AO, and BO objects on the BACnet system. All operations are transparent to the user and host computer

Landis & Staefa Gateway Cut Sheet

Landis & Staefa Gateway User Manual


Staefa Gateway for Smart II Controllers

The Centaurus Prime Staefa Gateway allows any front-end system (Modbus Master or BACnet/IP) that communicates using either the industry-standard Modbus or BACnet protocols to communicate to Staefa Smart II field equipment. The Staefa field devices will appear to the front-end system as a series of Modbus SLAVE devices or BACnet Devices. Each Smart II Controller will map to one of these devices. Real time point data from the Staefa controllers is then mapped to equivalent registers, coils, and bits on the Modbus system, or as AI, BI, AO, and BO objects on the BACnet system. All operations are transparent to the user and the host computer.

Staefa Smart II Gateway Cut Sheet

Staefa Smart II Gateway


Barber-Colman "ASD" Gateway

The Centaurus Prime “ASD” Gateway allows you to integrate legacy Invensys/Barber-Colman ASD-bus devices (PEM, MicroZone-II, MicroFlo-II, and MicroNet) to a modern, open BACnet control system.

BC Gateway Cut Sheet

BC Gateway User Manual


Integrate Universal Lighting Controls To BACnet

The Centaurus Prime “ULT” Gateway allows you to integrate Universal Lighting Controls DCL and CCM devices to a modern,
open BACnet control system.

ULT Gateway Cut Sheet

ULT Gateway User Manual

Copyright, Centaurus Prime, Inc   2021